Preset Scenes
Preset Scenes save and quickly apply your preferred spatial-screen, display, and sound settings. Use Scene 1, Scene 2, and Scene 3 to store three configurations.
Save the current configuration
- Adjust screen size, distance, spatial modes, and display and sound options as needed.
- Double-click 「X」 to open the OSD and go to 「Settings」 > 「Preset Scenes」.
- Select a scene, then choose Save.
Saving updates that scene. Saving to the same scene again replaces its previous configuration.
Apply a saved scene
- Open 「Settings」 > 「Preset Scenes」.
- Select a scene, then choose Apply.
- Wait for the display to finish switching.
The screen may briefly go black or the OSD may close while the settings are applied. Wait for the picture to return.
Which settings are saved?
| Category | Saved settings |
|---|---|
| Screen size and distance | Current screen size and distance |
| Spatial Screen | 3D mode, UltraWide, Side View, Spatial Anchor, Stabilizer, and Auto Transparency |
| Display and Sound | Display mode, dynamic range, color temperature, and audio protocol |
Only settings available for the current device and connection are saved. Scenes do not save volume or system settings such as General, Quick Button, and XREAL Eye configuration.
Why are some settings not applied?
Each feature still requires its normal operating conditions. For example, Spatial Anchor cannot be enabled without XREAL Eye, and an audio protocol required by a connected device cannot be overridden by a scene. Other available settings are still applied.
If Preset Scenes is assigned to the Quick button, activate the shortcut and select a scene to apply it. The shortcut only applies scenes; to save a configuration, use 「Settings」 > 「Preset Scenes」.