Skip to main content

Screen Leveling

「Screen Leveling」 is used to fine-tune the horizontal angle of the screen in 「Anchor」 mode, aligning the screen with the real environment.

After enabling 「Screen Leveling」, you can make fine adjustments to the screen's horizontal angle based on your personal viewing angle and usage scenario, ensuring the screen always stays in a comfortable viewing position.

How to Enable​

  1. Double-click the 「Menu Button」 to open the menu
  2. Go to 「Spatial Screen」
  3. Find 「Screen Leveling」, click the 「Menu Button」 to enter the adjustment interface
  4. Use the 「+ / -」 buttons to fine-tune the screen horizontal angle

Adjustment Parameters and Interaction Logic​

Roll, Yaw, and Pitch are the three basic directions that describe the rotational degrees of freedom of an object in three-dimensional space.

How to Adjust the Angle​

「Screen Leveling」 supports fine-tuning across three dimensions:

  • Roll (horizontal tilt)
  • Yaw (horizontal rotation)
  • Pitch (vertical tilt)

Click the 「Menu Button」 to cycle through selecting 「Roll」, 「Yaw」, or 「Pitch」, then use the 「+ / -」 buttons to make fine adjustments. Long-press the 「Menu Button」 to reset the adjustment.

Adjustment Rules​

  • Step size: ±0.5° per adjustment
  • Adjustment range: -5° to +5°
  • Memory function: Angle settings support power-off memory. Settings are saved when disconnected, exiting the menu via double-clicking the 「Menu Button」, or exiting via the Quick Button.

Use Cases​

  • Adjusting the screen to be perfectly level in 「Anchor」 Mode
  • Fine-tuning the screen tilt angle based on your sitting posture or usage habits
  • Using together with 「Spatial Anchor」 to better align the virtual screen with a real desk or wall

Usage Tips​

  • Screen Leveling only takes effect in 「Anchor」 mode
  • The adjustment range is small, suitable for fine tuning
  • It is recommended to perform the leveling operation at your usual viewing position for the best results