Skip to main content

Others

The Other features menu contains various system settings and auxiliary functions.

Button Tutorial​

If you would like to review the button function tutorial, follow this path:

Double press the 「Quick Button」 → 「Others」 → 「Tutorial」

👉 You can also view the Button Guide here

Sensor Calibration​

If you notice screen drifting in 「Anchor」 mode, try performing sensor calibration:

  1. Double-click the 「Menu Button」 → 「Other」 → 「Sensor Calibration」
  2. After entering sensor calibration, follow the on-screen prompts to place the glasses flat on a table and wait briefly. A confirmation tone indicates calibration is complete.

Auto Shutdown​

Set the glasses to automatically shut down after a period of inactivity to save battery.

  1. Double-click the 「Menu Button」 → 「Other」 → 「Auto Shutdown」
  2. Set the auto shutdown time according to your needs

Language Settings​

To change the display language of the function menu:

Double-click the 「Menu Button」 → 「Other」 → 「Language Settings」

Select the desired language:

Laboratory​

Enter the laboratory to customize the glasses' UltraWide mode and Audio Protocol power-off memory settings.

Power-off memory for UltraWide mode​

  1. Double-click the red 「Menu Button」 to enable the OSD menu and select 「Other」.
  2. On the 「Other」menu page, keep clicking 「-」button to turn to the last page, then you can find「Laboratory」.
  3. Click the red 「Menu Button」 to enter 「Laboratory」, then select 「21:9」/「32:9」 or 「16:18」 to enable the corresponding default ultra-wide mode.
  4. Once set up, the glasses will automatically enter 「UltraWide Mode」 each time they connect.

Power-off memory for Audio Protocol​

  1. Double-click the red 「Menu」 to enable the OSD menu and select 「Other」.
  2. On the 「Other」menu page, keep clicking 「-」button to turn to the last page and find「Laboratory」.
  3. Click the red「Menu Button」 to enter「Laboratory」, then select 「UAC」or「DP」 to enable the default 「Audio Protocol」.
  4. Once set up, the glasses will automatically enter your desired audio protocol mode each time they connect.

Reverse Menu Direction​

Adjust the display direction of the menu to suit different wearing habits.

  1. Double-click the 「Menu Button」 → 「Other」 → 「Reverse Menu Direction」

Serial Number​

You can view the product serial number by following this path:

Double-click the 「Menu Button」 → 「Other」 → 「Serial Number」

Version​

You can view the glasses firmware version by following this path:

Double-click the 「Menu Button」 → 「Other」 → 「Version」

Reset to Factory Settings​

To restore all settings to factory defaults, follow this path:

Double-click the 「Menu Button」 → 「Other」 → 「Reset to Factory Settings」

Notes

This operation resets all settings on the glasses to their default values and cannot be undone.