Skip to main content

Accessory

This chapter introduces all accessories included in the glasses package and explains how to use them.

Accessory List

Please make sure all accessories are included in the glasses package:

  • Detachable Front Frame
  • Light Blocker (only for xbx a01+)
  • Glasses Case
  • USB-C Cable
  • 3 nose pads (S/M/L; size M is pre-installed on the glasses)

Portable Case

The portable case is designed specifically for the glasses and helps protect them from pressure and scratches during carrying.

Store the Glasses Properly

  1. Fold the glasses temples inward
  2. Place the USB-C cable separately in the storage compartment
  3. Place the glasses in the storage compartment, making sure the lenses face outward and the folded temples face inward.
  4. Close the portable case
Recommendation

When storing the glasses, make sure the USB-C cable and the glasses are placed separately to prevent the cable from pressing against or scratching the optical lenses.

USB-C Cable

The glasses come with a 1.2 m full-featured USB-C cable that supports DP video output and charging. Connect the angled connector to the glasses temple, and connect the straight connector to a device that supports DP video output.

Connection Steps

  1. Connect the angled end of the cable to the glasses port
  2. Connect the other end of the cable (straight connector) to a device that supports DP video output
  3. After confirming that the connection is secure, put on the glasses to start using them

Replaceable Nose Pads

The glasses come with 3 sizes of replaceable nose pads, allowing users with different face shapes to choose the most suitable size.

Nose Pad Sizes

SizeSuitable For
S (Small)Higher nose bridge
M (Medium) (pre-installed on the glasses by default)Medium nose bridge height
L (Large)Lower nose bridge

Replacement Method

  1. Remove the original nose pads from the glasses
  2. Choose a new nose pad in the appropriate size
  3. Align the nose pad with the mounting slot and gently press it until it is fixed in place
Recommendation

Size S nose pads position the glasses relatively higher, while size L nose pads position the glasses relatively lower. If the image appears too high, try size L. If the image appears too low, try size S.

Prescription Lenses

The glasses support the installation of prescription lenses for myopia and astigmatism, helping users with vision correction needs get a clear visual experience.

Installation Notes

  • The temple bend should not press against the lenses
  • After installation, make sure the lenses are securely fixed
  • Check the image alignment again
Note

If you are not sure how to install the prescription lenses, we recommend contacting e-commerce customer service for assistance. If you install them yourself, handle them carefully to avoid damaging the lenses or the glasses.