Basic Operations and Modes
Basic Operations
| Operation | Description |
|---|
| Power On | Toggle the Mode Switch to the corresponding position, then press the Home button. |
| Power Off | Toggle the Mode Switch to the Off position. The controller also turns off automatically after 10 minutes of inactivity. |
| Low Battery | When the battery level is below 15%, the Home light flashes red. |
| Charging | Charge the controller through the USB-C port or charging station. When the controller is off, the Home light indicates charging progress with a breathing light effect. |
Connection Status
| Status | Home Light | Description |
|---|
| Connected | Solid | The device is successfully connected. |
| Pairing | Flashes rapidly | The controller can be discovered and connected by a new device. |
| Reconnecting | Breathes slowly | The controller automatically reconnects to the last successfully connected device. Press and hold the Pairing button to enter pairing mode manually. |
Wireless Modes
| Platform | Mode Switch Position | Mode | Home Light | How to Select the Mode |
|---|
| PC / Switch / Android | Receiver mode | Receiver | Green | Toggle the Mode Switch to Receiver mode. |
| Switch | Bluetooth mode | Switch | Red | Toggle the Mode Switch to Bluetooth mode, then hold Home + Y for 2 seconds. |
| Android | Bluetooth mode | Android | Yellow | Toggle the Mode Switch to Bluetooth mode, then hold Home + B for 2 seconds. |
| Android XR | Bluetooth mode | Android XR | White | Toggle the Mode Switch to Bluetooth mode, then hold Home + X for 2 seconds. |
Wired and Receiver Modes
| Platform | Mode | Home Light | Connection Method |
|---|
| PC | XInput | Green | Wired: Connect the controller to the device using the USB-C cable; no additional setup is required. Receiver: Toggle the Mode Switch to Receiver mode. |
| Switch | Switch | Red | Toggle the Mode Switch to Receiver mode. |
| Android | DInput | Yellow | Toggle the Mode Switch to Receiver mode. |
The controller detects the mode automatically by default. After a successful connection, hold View + Menu for 2 seconds to cycle through XInput, Switch, and DInput modes.
After connecting, press and hold the M button to check the current mode.